Product Description
Technical Specification
Transducers
Accessories
Instruction Manual
Data Sheet

CG100 Corrosion Thickness Gauges

With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.

The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.

 

CG100 Thickness Gauge

Features:

  • Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
  • Adjustable gain: -30dB to 70dB range
  • Automatic gain control (AGC)
  • Time corrected gain (TCG)
  • Gate control
  • Threshold adjustment
  • 64 User defined setups
  • Multiple language display
  • Multiple calibration and material selection options
  • High speed scan mode: 32 readings per second
  • Differential and minimal thickness alarm modes
  • Data output and storage: 16,000 readings and waveforms or B-Scans
  • Download to ElcoMaster® data management software

Select a transducer

 

CG100B

The CG100B Corrosion Thickness Gauge features automatic gain control (AGC) for ease of use or manual adjustment (-30dB to 70dB) to increase the amplitude of the received echo to suit the material properties.

Click here for a full product specification. 

 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Pulsed Echo Temp Comp (PETP) Measurement Mode Coating Thickness (CT) Measurement Mode Echo Echo Verify (EEV) Measurement Mode Pulsed Echo Coating Thickness (PECT) Measurement Mode Automatic Gain Control (AGC) B-Scan Display Mode 

CG100B Thickness Gauge 

CG100BDL

The CG100BDL Corrosion Thickness Gauge stores up to 16,000 readings with individual waveforms in alpha-numeric batches and full data logging through RS232 data output to ElcoMaster® data management software.

Click here for a full product specification. 

 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Pulsed Echo Temp Comp (PETP) Measurement Mode Coating Thickness (CT) Measurement Mode Echo Echo Verify (EEV) Measurement Mode Pulsed Echo Coating Thickness (PECT) Measurement Mode Automatic Gain Control (AGC) B-Scan Display Mode 

CG100BDL Thickness Gauge

CG100ABDL

The CG100ABDL Corrosion Thickness Gauge stores up to 16,000 readings with individual waveforms, displays A-Scan and B-Scan and offers full data logging through RS232 data output to ElcoMaster® data management software.

Click here for a full product specification. 

 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Pulsed Echo Temp Comp (PETP) Measurement Mode Coating Thickness (CT) Measurement Mode Echo Echo Verify (EEV) Measurement Mode Pulsed Echo Coating Thickness (PECT) Measurement Mode Automatic Gain Control (AGC) B-Scan Display Mode A-Scan Display Mode 

CG100ABDL Thickness Gauge

 

CG100ABDL+

With its high contrasting colour display the CG100ABDL+ Corrosion Thickness Gauge has a refresh rate of 120Hz providing users with an instant measurement response.

Click here for a full product specification. 

 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Pulsed Echo Temp Comp (PETP) Measurement Mode Coating Thickness (CT) Measurement Mode Echo Echo Verify (EEV) Measurement Mode Pulsed Echo Coating Thickness (PECT) Measurement Mode Automatic Gain Control (AGC) B-Scan Display Mode A-Scan Display Mode 

CG100ABDL+ Thickness Gauge

 

 

CG100 Features Explained

 

Repeatability / Stability Indicator
Consisting of 6 vertical bars, when all the bars are fully illuminated and the last digit on the digital thickness value is stable, the gauge is reliably measuring the material thickness.

High Speed Scan with Minimum Thickness Display
By significantly increasing the measurement refresh rate this mode allows the user to make scanned passes over the test material. The smallest thickness value is held in memory and displayed when scanning is complete. This feature can also be used in conjunction with the minimum & maximum limit alarm feature (model dependant).

Differential Mode
Once a user defined nominal thickness value has been set, the gauge will display the +/- thickness difference from the nominal value entered.

Limit Alarm Mode
The user can define minimum and maximum thickness limits. If the measurement falls outside the upper or lower limit a red LED will light and the beeper sounds. A green LED will light to indicate an acceptable thickness.

V-Path CorrectionV Path Correction

Dual element transducers consist of a probe with two crystals (one to transmit and one to receive the sound pulse). The crystals are separated by an acoustic barrier - generating a 'V-shaped' sound path as the sound travels from one element to the other.
This path is slightly longer than the direct path therefore V-path correction is used to calculate the correct thickness.

 

 

CG100 Measurement Modes Explained

 

Pulse - Echo Mode Pulse - Echo Mode (PE):
The normal display mode, measures the total thickness from the base of the transducer probe to the material density boundary (typically the back wall). Ideal for pit and flaw detection.
Pulse - Echo Temp Comp Mode  Pulse - Echo Temp Comp Mode  (PETP):
Similar to the PE mode, PETP takes into account and compensates for the variations in measurement caused by temperature variations. 
       
Echo - Echo Mode Echo - Echo Mode (EE):
Also known as the ThruPaint™ Mode, EE ignores the coating thickness, displaying the material thickness from the top surface of the material to the material density boundary.
Echo - Echo Verify Mode Echo - Echo Verify Mode (EEV):
The echo-echo verify mode measures by comparing the values between 3 reflections and is commonly used to eliminate errors from surface coatings and to make measurements in multiple layered materials.
       
Coating Only Mode Coating Only Mode (CT):
Displays the thickness of the coating applied to the material.
Pulse - Echo Coating Mode Pulse - Echo Coating Mode (PECT):
Displays both the material thickness (PE) and the coating thickness (CT) at the same time.
       
Basic Flaw Mode Basic Flaw Mode (FLAW MODE):
Basic prove-up flaw detection using single element angle beam transducers is available on the CG100ABDL and CG100ABDL+ corrosion thickness gauges.
   

 

 

CG100 Display Modes Explained

 

CG70 B-Scan

Material Thickness Digits Display:

The standard display on all models, this displays the numerical thickness value in either millimetres (MM)or inches (IN).

Scan Bar Display:

A linear graphic display which allows users to graphically monitor changes in thickness readings. As the scale range can be adjusted by the user, this display is ideal for observing tiny variations in material thicknesses.

B-Scan Display:

A time based cross sectional 2D block view of the thickness provides a graphical view of the material thickness - ideal for relative depth analysis.

   
CG70 A-Scan

A-Scan Display; Full Wave (RF):*

The A-Scan display shows the sine wave created by the reflected sound, or oscillation, from the material being measured. In RF mode the full wave form is displayed.

A-Scan Display; Rectified (+ or -):*

Users can select to view either the positive or the negative cycle of the full waveform (RF). This rectified (RECT) display shows the amplitude of the echo versus the transit time.

 

* Available on CG100ABDL and CG100ABDL+ Models only

CG100ABDL Corrosion Thickness Gauge
CG100B Material Thickness GaugeCG100 Corrosion Thickness GaugeCG100 Material Thickness Gauge

Technical Specification

Model & Part Number CG100B CG100BDL CG100ABDL CG100ABDL+
Material thickness digits display

B-Scan cross sectional display

Combined B-Scan and digits display

Scan bar display

Coating thickness display

A-Scan Display    

+ Rectified, - Rectified,
Full Waveform (RF)

+ Rectified, - Rectified,
Full Waveform (RF)
Measurement Mode PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT
PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT 
PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT
PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT
Measurement Rate
Manual:
Scan mode
Scan bar display
4 readings per second
50 readings per second
6 readings per second
4 readings per second
50 readings per second
6 readings per second
 
4 readings per second
50 readings per second
6 readings per second
 
4 readings per second
32 readings per second
6 readings per second
Measuring Range

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inches)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.001 - 0.100 inches) 

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inches)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.001 - 0.100 inches)  

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inch)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.0005 - 0.100 inch) 

PE: 0.63 - 508mm
(0.025 - 19.999 inches)
PETP: 0.63 - 508mm
(0.025 - 19.999 inches)
EE: 1.27 - 102mm
(0.050 - 4.000 inches)
EEV: 1.27 - 25.4mm
(0.050 - 1.000 inch)
CT: 0.01 - 2.54mm
(0.001 - 0.100 inches)
PECT: 0.63 - 508mm
(0.025 - 19.999 inches)
PECT: 0.01 - 2.54mm
(0.0005 - 0.100 inch)

Measurement Accuracy

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater

Measurement Resolution

0.01mm (0.001 inches)

0.01mm (0.001 inches)

0.01mm (0.001 inches)

0.01mm (0.001 inches)

Velocity Calibration Range

1250 - 13,995m/s
(0.0492 - 0.5510in/ms)

 1250 - 13,995m/s
(0.0492 - 0.5510in/ms)
 1250 - 13,995m/s
(0.0492 - 0.5510in/ms)

1250 - 13,995m/s
(0.0492 - 0.5510in/ms)

Additional Features:
High speed scan mode

Differential mode

Limit alarm mode

B-Scan display speed 15 seconds per screen

15 seconds per screen

 Adjustable display speed Adjustable display speed
Flaw mode    

Basic prove-up flaw detection using single element angle beam transducers

Basic prove-up flaw detection using single element angle beam transducers
Calibration setups  6 factory & 64 user-definable setups transferrable to and from a PC archive

6 factory & 64 user-definable setups transferrable to and from a PC archive

6 factory & 64 user-definable setups transferrable to and from a PC archive 

6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates      3 fully adjustable gates: start, stop, width & threshold 3 fully adjustable gates: start, stop, width & threshold
Damping       Adjustable; impedance matching for optimising transducer performance
Pulser type

Dual square wave pulsers up to 140Hz pulse repetition rate

Dual square wave pulsers up to 140Hz pulse repetition rate  

Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration

Dual 200 volt square wave pulsers with adjustable pulse width
(spike, thin, wide) and 50 volt cut/boost for greater penetration
Gain  Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi

Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi

Manual, automatic gain control (AGC) with 110dB range (limited)

Manual, automatic gain control (AGC) with 110dB range (limited)

Timing

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

Data logging  
  • 16,000 with B-scan image & gauge settings
  • 210,000 - coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
  • 16,000 with B-scan image & gauge settings
  • 210,000 - coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
  • 8,000 with A/B-scan image & gauge settings
  • 210,000 - coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
Calibration Options

Single, two point, velocity & material type

Single, two point, velocity & material type

Single, two point, velocity & material type

Single, two point, velocity & material type
Transducer Probe Type  Dual element

Dual element

Dual element & flaw prove up

Dual element & flaw prove up
Transducer Frequency Range 1 - 10MHz  1 - 10MHz  1 - 10MHz  1 - 10MHz
Transducer recognition Automatic & manual - selectable from a list   Automatic & manual - selectable from a list  Automatic & manual - selectable from a list   Automatic & manual - selectable from a list 
V-path / dual path error correction  Automatic  Automatic Automatic  Automatic
Probe zero Automatic & manual (via integrated probe disk) Automatic & manual (via integrated probe disk)  Automatic & manual (via integrated probe disk)  Automatic & manual (via integrated probe disk)
Display  1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area

1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area  

1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area  

1/4 VGA AMOLED colour display
57.6 x 43.2mm
(2.27 x 1.78inch)
viewable area
Display Refresh Rate  25Hz 25Hz  25Hz  120Hz
Units (selectable)  mm or inches  mm or inches mm or inches  mm or inches
Backlight

on / off / auto

on / off / auto   on / off / auto  adjustable brightness
Repeatability / Stability Indicator

Battery Type 3 x AA alkaline 3 x AA alkaline 3 x AA alkaline 3 x AA alkaline
Battery Life (approximate) 150 hours 150 hours 50 hours 25 hours
Low Battery Indicator

Battery Save Mode  auto  auto  auto auto
Operating Temperature  -10 to 60ºC (14 to 140ºF)  -10 to 60ºC (14 to 140ºF)  -10 to 60ºC (14 to 140ºF) -10 to 60ºC (14 to 140ºF)
Size (w x h x d)  63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
 63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
 63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
Weight (including batteries) 383g (13.5oz) 383g (13.5oz) 383g (13.5oz) 383g (13.5oz)
Aluminium case design with gasket sealed end
caps, waterproof membrane keypad

Transducer Connector Type  LEMO  LEMO  LEMO LEMO
RS232 Interface  Bi-directional  Bi-directional  Bi-directional Bi-directional
Packing List Elcometer NDT CG100B gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries Elcometer NDT CG100BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable Elcometer NDT CG100ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable

Transducers

 

Corrosion Thickness Gauge Transducers

 

A complete range of dual element thickness transducers, ideal for inspecting metal substrates.

Dual Element Transducers

 

 

 

 

 

 

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Lemo

Top

Side

Cast Iron

Plastics

Fibreglass

Thin

Fibreglass

Steel

 

1.00 MHz Dual Element Thickness Transducer

TX1M00EP-1

1/2"

Standard

S

 

   

 

   

TX1M00EP-2

1/2"

Standard

S

 

     

   

TX1M00EM-1

1/2"

Standard

S

   

 

 

   

TX1M00EM-2

1/2"

Standard

S

   

   

   

TX1M00EP-3

1/2"

Composite

S

 

     

   

TX1M00EL

1/2"

Composite

S

     

 

   
                             

2.25 MHz Dual Element Thickness Transducer

TX2M25CP-1

1/4"

Standard

S

 

   

 

 

 

TX2M25CP-2

1/4"

Standard

S

 

     

 

 

TX2M25CM-1

1/4"

Standard

S

   

 

 

 

 

TX2M25CM-2

1/4"

Standard

S

   

   

 

 

TX2M25CP-3

1/4"

Hi Temp2

S

 

   

 

 

 

TX2M25CM-3

1/4"

Hi Temp2

S

   

 

 

 

 

TX2M25EP-1

1/2"

Standard

S

 

   

 

 

 

TX2M25EP-2

1/2"

Standard

S

 

     

 

 

TX2M25EM-1

1/2"

Standard

S

   

 

 

 

 

TX2M25EM-2

1/2"

Standard

S

   

   

 

 

TX2M25EP-3

1/2"

Hi Temp2

S

 

   

 

 

 

TX2M25EM-3

1/2"

Hi Temp2

S

   

 

 

 

 

TX2M25EP-4

1/2"

Composite

S

 

     

 

 

TX2M25EL-1

1/2"

Armoured

S

     

 

 

 
                             

3.50 MHz Dual Element Thickness Transducer

TX3M50EP-4

1/2"

Standard

H

     

 

TX3M50EP-1

1/2"

Coating

Thickness

CT

     

 

 

 

 

 

 

 

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Lemo

Top

Side

Cast Iron

Thin Plastics

Steel

Glass

                           

5.00 MHz Dual Element Thickness Transducer

TX5M00BP-2

3/16"

Standard

S  

   

   

TX5M00BP-3

3/16"

Standard

S  

     

 

TX5M00BP-5

3/16"

Standard

H

     

 

TX5M00BM

3/16"

Standard

S    

   

 

TX5M00BP-1

3/16"

Low Profile

S  

     

 

TX5M00BP-4

3/16"

Coating

Thickness

CT

     

 

TX5M00CP-3

1/4"

Standard

S  

   

   

TX5M00CP-9

1/4"

Standard

H

   

   

TX5M00CP-4

1/4"

Standard

S  

     

 

TX5M00CP-10

1/4"

Standard

H

     

 

TX5M00CM-1

1/4"

Standard

S    

 

   

TX5M00CM-2

1/4"

Standard

S    

   

 

TX5M00CM-9

1/4"

Standard

H

 

   

 

TX5M00CP-1

1/4"

Low Profile

1" Wand

S  

     

 

TX5M00CP-2

1/4"

Low Profile

9" Wand

S  

     

 

TX5M00CP-6

1/4"

Coating

Thickness

CT

     

 

TX5M00CM-3

1/4"

Coating

Thickness

CT

 

   

 

TX5M00CP-7

1/4"

Hi Temp2

S  

   

   

TX5M00CP-8

1/4"

Hi Temp2

H

   

   

TX5M00CM-4

1/4"

Hi Temp2

H

 

 

   

TX5M00CM-5

1/4"

Hi Temp2

S    

 

   

TX5M00EP-2

1/2"

Standard

S  

   

   

TX5M00EP-3

1/2"

Standard

S        

 

TX5M00EP-10

1/2"

Standard

H

     

 

TX5M00EM-1

1/2"

Standard

S    

 

   

TX5M00EM-2

1/2"

Standard

S    

   

 

TX5M00EP-4

1/2"

Coating

Thickness

CT

     

 

TX5M00EP-5

1/2"

Hi Temp2

S  

   

   

TX5M00EM-3

1/2"

Hi Temp2

S    

 

   

TX5M00EM-4

1/2"

Hi Temp2

S    

 

   

TX5M00EP-6

1/2"

Hi Temp2

H

   

   

TX5M00EL-1

1/2"

Armoured

S      

 

 

TX5M00EP-1

1/2"

Cylinder Probe -

Iron

S  

     

 

         

Connector Type

Suitable for measuring

Part Number

Probe

Diameter

Probe

Characteristic

Damping

ThruPaint

Potted

Microdot

Top

Side

Thin Plastics

Steel

Glass

Aluminium

Titanium

                           

7.50 MHz Dual Element Thickness Transducer

TX7M50BP-1

3/16"

Standard

S  

 

 

 

TX7M50BP-2

3/16"

Standard

S  

   

 

TX7M50BP-3

3/16"

Coating

Thickness

CT

   

 

TX7M50CP-1

1/4"

Exxon Spec

S  

 

 

 

TX7M50CP-2

1/4"

Exxon Spec

S  

   

 

TX7M50CM-1

1/4"

Exxon Spec

S    

 

 

TX7M50CM-2

1/4"

Exxon Spec

S    

 

 

TX7M50CP-3

1/4"

High Resolution

S  

 

 

 

TX7M50CP-4

1/4"

High Resolution

S  

   

 

TX7M50CP-6

1/4"

Standard

H

   

 

TX7M50CP-5

1/4"

Coating

Thickness

CT

   

 

TX7M50CM-3

1/4"

High Resolution

S    

 

 

TX7M50CM-4

1/4"

High Resolution

S    

 

 

 

                         

10.00 MHz Dual Element Thickness Transducer

TX10M0BP-1

3/16"

Standard

S  

   

 

TX10M0BP-2

3/16"

Standard

S  

 

   

TX10M0CP-3

1/4"

Standard

S  

 

     

TX10M0CP-4

1/4"

Standard

S  

   

   

TX10M0CM-1

1/4"

Standard

S    

     

TX10M0CM-2

1/4"

Standard

S    

 

   

TX10M0CP-1

1/4"

Low Profile

1" Wand

S  

   

 

TX10M0CP-2

1/4"

Low Profile

9" Wand

S  

   

 

TX10M0EP-2

1/2"

Standard

S  

 

     

TX10M0EP-3

1/2"

Standard

S  

   

   

TX10M0EM-1

1/2"

Standard

S    

     

TX10M0EM-2

1/2"

Standard

S    

 

   

TX10M0EP-1

1/2"

Cylinder Probe -

Aluminium

S  

   

 

 

 

2 High temperature probes suitable for measuring 343°C (650°F)

S - Standard Undamped Transducer 

CT - Damped Coating Thickness Transducer

HD - Highly damped Transducer

H - Highly Damped Transducer

Accessories

Cables & Adaptators  
TL-24030-1 T/Cable: 4' Single Lemo 00 to BNC
TL-24030-2 T/Cable: 4' Single Lemo 00 to Lemo 00
TL-24030-3 T/Cable: 4' Single Lemo 00 to Microdot
TL-24030-6 T/Cable: 4' Dual Lemo to Lemo
TL-24030-8 T/Cable: 4' Dual Lemo to Microdot Single
TL-24031 RS232 Cable (6'); DB-9 to Lemo
TL-24032 USB to Serial Adapter
   
Couplant  
TC-24034-1 Couplant: Standard; 4oz Bottle (Material Safety Data Sheet)
TC-24034-2 Couplant: Standard; 12oz Bottle (Material Safety Data Sheet)
TC-24034-3 Couplant: Standard; 1 Gallon (Material Safety Data Sheet)
TC-24034-9 Couplant: Hi-Temp 510°C; 2oz Tube (Material Safety Data Sheet)

Data Sheet

@PRODUCT_DATA_SHEET